These new single-cylinder engines are the result of listening to leading equipment manufacturers, contractors and owners of rental stores who talked about operating power equipment under the most challenging conditions. Take a closer look: Every design innovation and integrated technology is customer-driven, because out there where the work gets done, proven engine performance means business.
Typical applications include: Cement Mixers, Aerators, Tillers, Pumps, Compaction Plates and Generators.
| Features | Benefits |
|---|---|
| Engine Warranty | New 3 year global commercial engine warranty |
| TransportGuard™ System | Simultaneous fuel/ignition shut-off protects the engine from oil/fuel dilution during transport |
| Overhead Valve Design | Runs cooler and cleaner delivering more power, longer engine life and improved fuel economy |
| Commercial-style Carburertor | Additional fuel passages ensure reliable starting and smooth running operation at a wide range loads |
| Large, Efficient Sediment Filter | Sediment is collected in a large, clear bowl and is drained using a convenient tool-free valve |
| All-metal Fuel Tank | Reduces emissions and is mounted directly to the engine block to enhance durability |
| Lubrication | |
| Motorsports Rod/Dipper Design | Efficiently improves oil flow throughout the engine; assures maximum protection of internal components |
| Oil Sensor | Automatically shuts down the engine in low oil situations to safeguard investment |
| Splash Lubrication System | Delivers superior lubrication to the engine to ensure long life and reliability |
| Mechanical | |
| High-mounted Canister-style Air Cleaner | 22% more filter area than the competition; water-repellent filter with innovative triple seal design dramatically decreases dirt, dust and debris intake |
| Magnetron® Electronic Ignition | Quick dependable starts with no maintenance required |
| Larger Ignition Coil | Assures fast, easy starts |
| Innovative Combustion Chamber | Improves air and fuel flow, resulting in a cleaner burn, reduced emissions and increased horsepower |
| Cylinder Head and Head Gasket | Increases power, stability and torque retention |
| Forged Crankshaft | Incorporates heat-treated ball bearings to minimize friction and heat build-up |
| Engine Dimensions | |
|---|---|
| Dimensions (LxWxH) | 10.83 in (275 mm) x 15.28 in (388 mm) x 14.29 in (363 mm) |
| Weight | 41.2 lbs (18.7 kg) |
| Fuel Tank Capacity | 4.1 L |
| Oil Capacity | 20oz (0.6L) |
| Engine Displacement | 205 cc (12.51 cu in) |
| Model # 13H100 | Download Engine Dimensions |
| Engine Specifications | |
|---|---|
| Gross Horsepower* | 5.5 Gross HP |
| Engine Displacement | 205 cc (12.51 cu in) |
| Number of Cylinders | One |
| Engine Configuration | Horizontal |
| Bore | 2.69 in (68 mm) |
| Stroke | 2.20 in (56 mm) |
| Compression Ratio | 8.3:1 |
| Ignition System | Magnetron� |
| Lubrication System | Splash |
| Carburetor | Single Barrel Float Feed |
| Engine Cooling | Air |
| Engine Fuel | Gasoline |
| Governor | Mechanical |
| PTO (Standard) | 3/4" SAE Keyway |
| Cylinder Block | Aluminum with Cast Iron Sleeve |
| Crankshaft | Forged |
| PTO Shaft Rotation | Counterclockwise from PTO side |
| Starter | Rewind or Electric |
| EPA Compliant Engine | Yes |
| Options |
|---|
| Remote Stop |
| Super-low tone Muffler |
| Red Blower Housing |
| CARB Compliant |
| Gearbox Options 6:1 |
| 12 Volt Electronic Start with Panel Key switch |
| Multiple Rewind Position |
| Alternators- 3.0, 10.0, 20.0 amp |
| EMS Compliant Spark Plug |
| Exhaust Deflectors |
| Tapered Crankshaft |
| Threaded Crankshaft |
| QGS Muffler Kit |
*All power levels are stated horsepower per SAE J1940 as rated by Briggs & Stratton.
Home | Where We Work | Engines | Power Vault | Service & Support | Where to Buy | News & Events | About Us | Contact Us | Site Map